Lock-N-Load - Strapless Moto Transport System

Size Guide
Size
Features
  • Saves your fork seals
  • No more straps or wheel chocks
  • Load more bikes and gear in your truck, van or trailer
  • Quick release from the trailer floor
  • Extra trailer plates are available (Sold Separately)
  • TRUCK PLATES available for mounting in trucks (Sold Separately)
Specifications
  • LOCK-N-LOAD
  • Model# 77849
  • Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
  • Weight: 20lb (9.1kg)
  • 1 year warranty
Lock-N-Load Standard Size

Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)



  • LOCK-N-LOAD JUNIOR
  • Model# 00204
  • Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
  • Weight: 19lb (8.6kg)
  • 1 year warranty
Lock-N-Load Junior Size

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)


How to measure your bike

To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to contact us if you have any bike specific questions. Select your desired size in the online store when ordering.

The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.

Included
  • [1] Lock-N-Load or Lock-N-Load JUNIOR
  • [1] Trailer Mounting Plates
  • [1] Mounting Hardware
  • [1] Instruction Sheet

The Easiest Way to Transport your Bike

The “Lock-N-Load” Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by unscrewing the 4 thumb screws leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor.


Lock-N-Load Step 1

Rotate the knobs into the lock position and simply roll or ride your bike into the trailer until your foot pegs hit the open jaws of the Lock-N-Load.

Lock-N-Load Step 2

Then step on the upper jaws and they will automatically lock into place.

Lock-N-Load Locking Step 3

For additional safety, insert the attached locking pins prior to transport. You can replace the locking pins with pad locks for added security and a theft deterrent.

Lock-N-Load Unlocking Step 1

To release your bike, simply rotate the knobs into the release position and step on the top jaws.

Lock-N-Load Unlocking Step 2

This will automatically release the jaws and free your motorcycle.

Risk Lock-N-Load in trailer

Available in Two Sizes

Standard

Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)
*see specifications for size guide

Risk Racing Lock-N-Load Full Size

Junior

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)
*see specifications for size guide

Risk Racing Lock-N-Load Junior

Features

Saves your fork seals

No more straps or wheel chocks

Load more bikes and gear in your truck, van or trailer

Quick release from the trailer floor

Extra trailer plates are available (Sold Separately)

TRUCK PLATES available for mounting in trucks (Sold Separately)


What's Included

Risk Racing Lock-N-Load
Lock-N-Load
Available in two sizes
Lock-N-Load Trailer Plates
1x Pair Trailer Plates
plus mounting hardware



California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



Customer Reviews

Based on 22 reviews Write a review